|
The Ronn Motor Company H2GO™ system debuted on November 4, 2008 at the SEMA show in Las Vegas, Nevada.
Electronic Box
click image to enlarge |
Hydrogen Reactor
click image to enlarge |
Overview - What’s H2GO™ All About?
H2GO™ is the first deliverable and available product in a line of quality built, improved performance, environmentally friendly systems being designed and developed by Ronn Motor Company to address the global move towards more environmentally conscious, sustainable automotive technologies.
H2GO™ provides an ideal, economical aftermarket solution for increasing fuel mileage while reducing noxious hydrocarbon emissions harmful to the environment. The Real-Time Hydrogen Fuel Injection system coupled with several proprietary systems within the new H2GO™ brand will boost and enhance overall efficiency in automotive fuel burn. Hydrogen and oxygen mixtures are utilized along with post-combustion controls to promote a more complete burn, thereby creating more power and improved gas mileage along with significantly less particulate emissions. The H2GO™ system produces and blends gaseous hydrogen with gasoline or diesel fuel to achieve 15% to 35% (see various vehicle test results) improvements in fuel consumption, while increasing power and decreasing hydrocarbons typically by 75% to 90%. Overall CO2 reductions will mirror fuel mileage improvements of 15% to 35%.
Components – What Makes H2GO Work?
H2GO™ utilizes Ronn Motor Company’s uses a programmable proprietary computerized electronic control module (ECM) to regulate and control the flow of hydrogen input into the combustion chamber of the engine. The H2GO™ hydrogen generation system is smaller than a standard car battery and holds less than a gallon of water, which produces hydrogen in real time through electrolysis of water as needed, on-the-go, for approximately 5000 miles as your vehicle moves down the road, before having to be refilled with water. No hydrogen is stored on-board your vehicle and no high pressure hydrogen tanks are utilized.
The ECM (computerized controller) is built to military aircraft specs, such as the F-18. It contains a microchip for programming and, as in military aircraft electronics, it is potted with military spec epoxy (tamper proof) which prevents theft of the proprietary and secret electronic components inside. The ECM is also protected against failure resulting from vibration, fire, dirt and can even be run under water. The ECM is approximately the size of a typical cell phone.
Testing – How Effective and Reliable is H2GO™ on Different Vehicles?
During the extensive research and testing, Ronn Motors programmed the controller for optimized emission reduction performance. This occurs when fuel savings are in the 15% to 22% range. These numbers can represent as much as 1,000 lbs of CO2 reduction in a typical vehicle driven approximately 15,000 miles per year equipped with the H2GO™ system. Depending on a number of variables, hydrocarbon emission reductions will be as high as 90%.
With the programmable microchip, H2GO™ can be quickly and easily programmed (by any installer) for optimal operating efficiency for any engine type, under variable speeds and engine loads. Higher fuel efficiency can easily be achieved but only at the expense of emission reduction improvements.
Uses - What Vehicles will Benefit from H2GO™ Installation?
H2GO™ is adaptable to any internal combustion piston engine vehicle which is applicable to over 250,000,000 registered vehicles on American roads alone, including over-the-road fleet trucks and RV’s, as well as prop aircraft and boats.
RMC has been quite methodical and taken the necessary time in the development and testing process to ensure that the final product that is now ready for production is far superior to anything else available in the market. H2GO™ now meets the standard of excellence we have set for our automobile and our Company.
Warranty – Will H2GO™ Void a Vehicle Warranty?
An important factor regarding the use of this hydrogen assist technology is that installation of the H2GO™ device will not void new car warranties under the Vehicle Warranty Act of 1974. The Act specifies that new car warranties will not be voided with the installation of an aftermarket product as long as it enhances the performance of a vehicle. It is expected that the H2GO™ fuel injection system will be widely accepted worldwide and a much sought out manufacturer’s aftermarket fuel enhancing product.
Extensive use of the H2GO™ system would reduce worldwide fossil fuel consumption by millions of barrels each year, providing savings to businesses and consumers, as well as help reduce dependence on foreign oil.
Cost – What does it Cost to “Go Green” with H2GO™?
Whether you are an individual vehicle owner or the owner of a fleet of vehicles, installation of H2GO™ will count you among a growing number of citizens that are taking action and embracing environmentally conscious and sustainability automotive technologies.
Depending on the number of miles driven on your vehicle(s) each day, H2GO™ can pay for itself in as little as a few months with the savings realized through improved fuel economy.
|